configure switch for vlan

Connect To Switch

  • Plug a cable into Master Management port (Top Left)

    • Note Serial Port is Top Left - down 1
  • Port default ip is

  • 192.168.50.50

  • Manually set the Laptop IP Address to be in the range of 192.168.50.x

Connect to Switch

  • telnet 192.168.50.50

  • username

    • admin
  • password

    • admin

Configure

  • type enable
  • type config t

Set Ports

  • type interface port 9-13
  • type switchport mode access
  • type switchport access vlan 11
  • type no shut

to show Vlan 11

   telnet 192.168.50.50
   admin/admin
   config t
   vlan 12 

Show Vlan

    config t
    show vlan